| BS6206, 建筑用平板安全玻璃和安全塑料冲击性能测试 pecificationfor Impact Performance Re for Flat Safety Glass andSafety Plastics for Use inBuilding | |
| Scope:This standard specifiesperformance re and a test method in respect of energyabsorption (impact) for flat safety glass and safety plastics foruse in buildings. These re are intended to reduce therisk of injuries caused by cutting and piercing in accidents wherethese materials are involved. Three classes of safety glass andsafety plastic are defined. This standard doesnot specify situations where safety glass and safety plasticsshould be used, nor does it specify re for theirdurability. | |
| Clause | TestRe |
| ClassA | |
| ClassB | |
| ClassC | |
| Toughenedglass | |
| Sample required: 样品要求: | Class A: 12 pieces of glass(865±3mm(W)*1930±3mm(H) or 865 mm W x at least 600 mmH). |
| Class B: 8 pieces of glass(865±3mm(W)*1930±3mm(H) or 865 mm W x at least 600 mmH) | |
| Class C: 4 pieces of glass(865±3mm(W)*1930±3mm(H) or 865 mm W x at least 600 mmH) | |
| For toughened glass, one extrapiece glass needed for toughening test | |
| A级:12块玻璃(865±3mm(宽)*1930±3(高)或865mm 宽 x 至少600 mm高) | |
| B级:8块玻璃(865±3mm(宽)*1930±3(高)或865mm 宽 x 至少600 mm高) | |
| C级:4块玻璃(865±3mm(宽)*1930±3(高)或865mm 宽 x 至少600 mm高) | |
| 若为钢化玻璃,另需加送一块玻璃碎片测试 | |
| Regular (7 workingdays) | |
| 标准(7 个工作天) | |
| Remark: 备注: | 1. The weight of the completeimpactor is 45kg. |
| 2. This standard is designedfor the safety assessment of flat safety glass and safety plasticsfor use in buildings, however it also may be referenced to evaluatethe performance of the glass used in furniture. | |
| 3. This standard requires allpanels shall be marked, accordingly please require client providingthe marking when the full tests are re | |
Sample forreference 参考图片:
">Sample Report报告样本：
